1 Install & Index Barrel, Headspace and Function Test
Part# LABOR1 $165.00
Includes locking shoulder, customer is required to send receiver, barrel, gas piston,
gas plug, handguard ring/cap, bolt and carrier.
2 Cut and Crown Threaded Barreled Receiver
Part# LABOR2 $180.00
3 Cut and Crown Threaded Stripped Barrel
Part# LABOR3 $60.00
4 Degrease Media Blast (Aluminum Oxide) of FAL Rifle
Part# LABOR4 $175.00
Finish with Mil Spec dark gray manganese phosphate (FAL rifle only).
5 Degrease Media Blast (Aluminum Oxide) of Barreled Receiver
Part# LABOR5 $80.00
Finish with Mil Spec dark gray manganese phosphate
6 Modify DSA Scope Mount for Trijicon 3.5x35 ACOG Optic
Part# LABOR6 $60.00
Customer supplies scope mount
7 Gunsmith Service to MILL Cut FAL Receiver to accept PARA Top cover with Nose
Part# LABOR7 $180.00
8 SA58 Speed Trigger Upgrade
Part# LABOR8 $149.95
SA58 Speed Trigger Upgrade provides a shorter, crisper, lighter and improved trigger control
without sacrificing safety and reliability. A perfect upgrade for the Three Gun or Action Shooter
who requires the utmost speed, as well as safety and accuracy. The trigger pull weight is
typically between 4.5-5.5 lbs., compared to the military 8-12 lbs. Offered on SA58 & STG58 rifle builds only.
9 SA58 Match Grade Set Trigger
Part# LABOR9 $250.00
Improves SA58 trigger control and practical accuracy without sacrificing safety and reliability.
The trigger pressure reduction button located at the upper front of the grip allows the shooter to
over ride the trigger return spring pressure and reduce the trigger let off to 3-4 lbs. This is quite
an improvement from the standard military trigger pull range of 8-12 lbs. Offered as modification
of the DSA FAL/SA58 rifles only. Match grade set trigger includes DSA, Inc. supplied FN SAW grip.
Grip modifications available for FN SAW grip only. Previously modified hammers, triggers, sears.
springs and pins will need to be replaced.
10 Silver Solder BATF Approved Muzzle Brake onto Threaded Barrel
Part# LABOR10 $180.00
Includes reparkerizing barrel and muzzle brake only, cost of muzzle brake not included.
11 Remove Silver Solder BATF Approved Muzzle Brake from Threaded Muzzle
Part# LABOR11 $180.00
Includes reparkerizing barrel and muzzle brake only
12 Gunsmith Services to Convert SA58 to California Legal Model
Part# LABOR12 $250.00 Includes Ejector Block
13 Install DSA Picatinny Gas Block (Gas Block not included)
Part# LABOR13 $60.00
Customer supplies new metric standard, carbine or medium contour barrel with no holes drilled.
Service include pressing on picatinny gas block, installing retaining dowel pin, drill/ream gas port
and drilling hole for handguard screw. Finishing of barrel not included.
14 Gunsmith Service to MILL Cut Carrier for Foward Assist Cocking Handle
Part# LABOR14 $60.00
15 Gunsmith Service to MILL Cut Receiver to Accept folding cocking handle
Part# LABOR15 $60.00
16 Robar NP3 Surface Treatment Upgrade
Part# NP3 $149.00
non-reflective coating with high lubricity, low friction and a micro hardness of 48-51RCD. NP3 is
corrosion and peel resistant and permits firing for longer periods of time between cleanings.
Cleaning an NP3 treated surface requires only a soft cloth with no lubrication. For SA58 and
DS ZM4 AR Rifle Builds only.
17 DuraCoat Finishes
Solid Color - Part# DURARIFLE $300.00
Camo Pattern - Part# CAMORIFLE $350.00
18 Gunsmith Services per Hour
Part# LABORHRLY $60.00
OTHER GUNSMITHING SERVICES CAN BE QUOTED BY E-MAIL, LETTER OR
TELEPHONE. OUR GUNSMITHING RATE IS A VERY NOMINAL $60 PER HOUR.
• DSA will only work on BATF compliant guns. The proper number of U.S. parts will be required. Please
refer to the compliance notice for the 1989 Import Ban and your state and local laws.
• DSA will only work on receivers/rifles manufactured by FN, DSA or Imbel.
• DSA will only work on quality parts that are in spec.
• The prices above are labor only except where noted and do not include shipping, handling & insurance.
• Prices, availability and specifications are subject to change without notice.
• Please provide appropriate packaging on rifles and parts sent to DSA Inc., hard shell cases are
preferred. Please insure all packages over $100.00.
Modifications by untrained persons can create an unsafe weapon!
DSA INC. / P.O. BOX 370 / BARRINGTON, IL 60011
HOURS: MON-FRI 8:30AM TO 5PM CST
TEL: (847) 277-7258 / FAX: (847)-277-7259