1 Install & Index Barrel, Headspace and Function Test
Part# LABOR1 $195.00
Install, Index And Headspace Barrel Onto Receiver - Includes Live Fire Function Test - locking shoulder supplied. Customer to provide the following components: upper receiver, cocking handle, magazine release & bolt hold open device with screw and spring, complete bolt, bolt carrier, barrel with gas block, handguard cap, gas plug, gas regulator, gas regulator sleeve spring, front sight post, front sight spring, front sight fixing plate, gas tube retaining nut, gas piston & gas piston spring - gas tube to be provided if barrel does not include it on the gas block. When shipping your parts to DS Arms for this service you must use a box large enough for your now barreled action to return to you, we recommend using a rifle case to ship your parts to us and for us to use for return shipment. *** If you do not supply the above mentioned parts for this service you may be charged an additional $40.00 For the gunsmiths time to install & remove the needed parts for the live fire function check - if you do not supply an appropriate shipping container for the return shipment we may charge you $25.00 for a rifle case for us to ship your newly assembled barreled action back to you safely & securely. ***
2 Cut, Crown & Re-Thread of Barrel Mounted To Receiver
Part# LABOR2 $200.00
3 Cut, Crown & Re-Thread Stripped Barrel
Part# LABOR3 $75.00
4 Degrease, Media Blast & Refinish (Manganese Phosphate) of FAL Rifle - For Steel Parts Only
Part# LABOR4 $200.00
Finish with Mil-Spec dark gray manganese phosphate (FAL Rifle Only).
5 Degrease, Media Blast & Re-Finish of Barreled Receiver - All Steel Components
Part# LABOR5 $100.00
Finish with Mil-Spec dark gray manganese phosphate (FAL Rifle Only).
6 Modify DSA Scope Mount for Trijicon 3.5x35 ACOG Optic
Part# LABOR6 $60.00
Customer supplies scope mount
7 Gunsmith Service to MILL Cut FAL Receiver to accept PARA Top cover with Nose
Part# LABOR7 $180.00
8 SA58 Speed Trigger Upgrade
Part# LABOR8 $149.95
DSA FAL SA58 Speed Trigger Upgrade For FAL Rifle -This is custom gunsmithing work that is done to the fire control components. This work results in a very crisp, smooth 5.5 - 6 lb. trigger pull with very little take up and almost zero over-travel. This is accomplished by polishing, honing and mating the fire control components to each other.
This service is available for new production rifles from DS Arms as well as existing Metric Pattern rifles.
9 SA58 Match Grade Set Trigger
Part# LABOR9 $199.95
Improves SA58 trigger control and practical accuracy without sacrificing safety and reliability. The trigger pressure reduction button located at the upper front of the grip allows the shooter to over ride the trigger return spring pressure and reduce the trigger let off to 3-4 lbs. This is quite an improvement from the standard military trigger pull range of 8-12 lbs. Offered as modification of the DSA FAL/SA58 rifles only. Match grade set trigger includes DSA, Inc. supplied FN SAW grip. Grip modifications available for FN SAW grip only. Previously modified hammers, triggers, sears. springs and pins will need to be replaced.
10 Gunsmith Service to Silver Solder Muzzle Device or B.A.T.F. Approved Muzzle Brake onto Threaded Barrel
Part# LABOR10 $200.00
This service includes the re-finish of the barrel & muzzle device or muzzle brake. It does NOT include the muzzle device or muzzle brake.
11 Gunsmith Service to Remove Silver Solder Muzzle Device or B.A.T.F. Approved Muzzle Brake from Threaded Barrel
Part# LABOR11 $200.00
This service includes the re-finish of the barrel & muzzle device or muzzle brake.
12 Gunsmith Services to Convert SA58 to California Legal Model
Part# LABOR12 $250.00 Includes Ejector Block
13 Install DSA Picatinny Gas Block (Gas Block not included)
Part# LABOR13 $60.00
Customer supplies new metric standard, carbine or medium contour barrel with no holes drilled. Service include pressing on picatinny gas block, installing retaining dowel pin, drill/ream gas port and drilling hole for handguard screw. Finishing of barrel not included.
14 Gunsmith Service to MILL Cut Bolt Carrier for Forward Assist Cocking Handle
Part# LABOR14 $90.00
15 Gunsmith Service to MILL Cut Receiver to Accept Folding Cocking Handle
Part# LABOR15 $90.00
16 DSA NPE- Nickel Phosphate Extreme Finish Upgrade To The FAL SA58 Rifle
Part# LABOR16 $199.95
DSA NPE - Nickel Phosphate Extreme Finish Upgrade To The FAL SA58 Rifle - For New Production Orders Only Or Complete Rebuilds - The DS Arms PE- Nickel Phosphate Extreme Upgrade Is A Self Lubricating Finish That Adds Hardness, Corrosion Resistance And Easy Cleaning & Maintenance.
The NPE - Nickel Phosphate Extreme Finish Is Not Just A Coating But Actually Permeates Into The Metal In Order To Provide Exceptionally Long Life And Continuously Keeping The Treatment On The Materials Surface.
Treated Components Include: Gas Regulator, Bolt Carrier, Bolt Body, Return Spring Plunger, Joint Pin, Hammer-Trigger-Sear Plunger, Hammer Spring Housing, Hammer & Trigger Axis Pins, Selector Switch, Frame Lock Lever-Body-Detent, Magazine Release And Magazine Release Screw
17 DuraCoat Finishes
Solid Color - Part# DURARIFLE $300.00
Camo Pattern - Part# CAMORIFLE $350.00
18 Gunsmith Services per Hour
Part# LABORHRLY $75.00
OTHER GUNSMITHING SERVICES CAN BE QUOTED BY E-MAIL, LETTER OR TELEPHONE. OUR GUNSMITHING RATE IS A VERY NOMINAL $75.00 PER HOUR.
• DSA will only work on BATF compliant guns. The proper number of U.S. parts will be required. Please refer to the compliance notice for the 1989 Import Ban and your state and local laws.
• DSA will only work on receivers/rifles manufactured by FN, DSA or Imbel. • DSA will only work on quality parts that are in spec.
• The prices above are labor only except where noted and do not include shipping, handling & insurance.
• Prices, availability and specifications are subject to change without notice.
• Please provide appropriate packaging on rifles and parts sent to DSA Inc., hard shell cases are preferred. Please insure all packages over $100.00.
Modifications by untrained persons can create an unsafe weapon!
DSA INC. / 27996 W Industrial Ave / Lake Barrington, IL 60010
HOURS: Monday-Friday 8:30am to 5:00pm CST
Phone: (847) 277-7258 / FAX: (847)-277-7259
